Anchor Flag And Flagpole
 What's New? more
ICC40C71 Internal Halyard Flush Door Cam Cleat
ICC40C71 Internal Halyard Flush Door Cam Cleat
 Quick Find more

Advanced Search
Residential Installation
Info: Independence Flagpoles
How I choose a flagpole
Replacing Line
Tieing Flag Snaps
How to build a flagpole.
Nylon Discription
Wind Speed Chart
American Flagpole Color Options
American Flagpole Options
Whats The Diffrence Between Residential & Commercial
Texas Flagpoles, Anchor Flag, Dallas, TX
United States American Flags, Anchor Flag
PMS Color chart, pantone color to CMYK
External Halyard Aluminum Flagpoles
Internal Halyard Aluminum Flagpoles Winch & Cable
Intrnal Halyard Rope System Aluminum Flagpoles
Internal Halyard Flagpole Parts
Printable Catalog
01.HAL0700 5/16" Halyard Flagpole Rope
02.HAL0200 Halyard 1/4" For Flagpoles
03.HAL0420 3/8" Halyard Flagpole Rope
04.American Made U.S. Nylon 3'x5' Flag
05.American US Flag 5'x8' Nylon
06.Bronze Color Halyard Or Silver Color
07.1 Nylon Flag Snap
08.American US Flag 4'x6' Nylon
09.4'x6' HD Polyester US American Flag
10.C Cast Bronze Flag Snap
Residential Installation

Before You Dig...

  • Read though these instructions and make sure that you have all the components and tools required for the installation.
  • Select a location for your flagpole where it cannot be struck by lawnmowers, automobiles, bikes, etc.
  • Avoid locations in the vicinity of power lines
  • and check for any underground gas or power lines.
  • Do not attempt to climb flagpoles.
  • Do not lean ladders against flagpoles.
  • Do not allow children to operate a flagpole unattended.

Tools and Accessories Required - Not Included

Note: Light Duty Home Kits only require approximately a 8 to 15 inch diameter hole, and the depth of hole would be equal to the length of sleeve that comes with your pole. Best to have gravel on bottom of hole for drainage. Dementions listed below are for commercial quality residential poles, but the procedure is the same.  General rule is 3 to 4 times the diameter of pole and 10% of pole height goes in ground. (20 ft. tall pole above ground =2 ft. in ground).            

Tie the two ends of your rope together and then palce a flag snap above the knot about 1 foot. Then the other snap the proper distance below the knot for your flag.


Show Below is a foundation for a 3" flagpole.

It is 18" diameter and 24" deep, The finished pad at surface is 24" diameter. Slightly larger than the footing below it but all poured at the same time.






 Shopping Cart more
0 items
 Sign in
E-mail address:


Password forgotten
Create an Account
 My Wish List more
0 items

All content and Images Copyright © 2020 Anchor Flag And Flagpole
Copyright © 2000 - 2020 osCmax
Powered by osCmax v2.5.3